Pictured here are end plates for vacuum chambers made of stainless steel grade 304L. There are two different sizes for all the 80 pieces of end plates，one is 1610mm in outer diameter and 30mm in thickness，the other one is Diameter 1484mmx Thickness 22mm. Our quality control on the flatness of the plate and the tight […]

Metal: 304 Stainless steel Quantity：20 units Fabrication Processes:  Cutting, Roll forming, Machining, Welding, Stress release, Acid pickling. Application：ABS and AS manufacturing Features： 1 Multiple fabrication processes are involved; 2 Several bulkheads for the tubes to go through, therefore high tolerance is required for all the parts; 3 Complicated twin type, being large and long, therefore […]

Metal：Carbon Steel Q345，equivalent to ASTM A529MGr50， Or EN10025-2 S355J2 Thickness：6mm Quantity：60pcs Processes of this Carbon Steel Fabrication: Slitting, Flattening, Laser Cutting and Bending/Folding Application：Request not to disclose Features： 1 Multiple bending/folding operation required； 2 Holes across the folding line； 3 Tight tolerance on straightness 4 Tight tolerance on bending corners; 5 Tight tolerance on flatness;  See […]

 We are going to complete the fabrication of 200pcs of bucket parts for an excavation machine manufacturer. The bucket parts are made from high tensile steel grade Q345D-Z35, with the following chemical composition and mechanical properties: C：≤0.18；Si：≤0.50；Mn：≤1.70；P：≤0.015；S：≤0.004；Ni：≤0.50；Als：≥0.02； Nb：≤0.05；Ti：≤0.05；Cr：≤0.30；Cu：≤0.30；Mo：≤0.10；V：≤0.15； Ceq≥0.43。 Yield strength：≤16mm：≥345Mpa；16—40mm：≥335 Mpa；40—63mm：≥325 Mpa；63—80mm：≥315 Mpa；80—100mm：≥305 Mpa；100—150mm：≥285 Mpa；150—200mm：≥275 Mpa；200—250 mm：≥275 Mpa；250—400 mm：≥265 Mpa。 Tensile Strength：450—630Mpa Elongation：≥21% Impact […]

Here pictured is an important part of printing and dyeing textile equipment, which is made from stainless steel 304. The job requires sawing, laser cutting, plasma cutting, bending, welding, machining. We completed all the processes under one roof. Look forward to larger machining and fabrication jobs, even tighter tolerance is fine to us.

We have been given the order for 600 sets of ticket gates used in subway station, among which the first batch of 58 sets is ready for immediate delivery. During the stainless steel fabrication of the ticket gate, there are three important processes，precision cutting，precision folding, and precision welding which are conducted by laser welding robot […]

This batch of products are used for wind power steel tower. Material: Q345B, thickness 8mm Max length of one piece: 11.85m

The product is the main part of the vacuum solid-liquid separation equipment, the processing involved laser cutting, leveling, machining, bending, welding and other processes, especially because the product shape is complex we need to bend 11 places. Our customer required that all angles must be controlled with tolerance within ± 0.3 degrees when bending, only […]

We have just finished a sulphur storage tank with a diameter of 7 metres, length of 11 metres and a wall thickness of 8/10mm special stainless steel. This tank was designed to withstand high pressures, high temperatures and corrosive environments. Not only this, the tanks have been manufactured with combustion and explosion hazards taken into […]

This large dryer cylinder with diameter: 6200x5600x5900 Standard requirements: ASME Major process: rolling and welding This dryer cylinder products have been completed manufacturing recently, and would be exported to Japan soon. Designed by a lead paper making equipment manufacturer, the product requires highly on its welding quality and harshly on its appearance due to Japan […]