Home >> News

8.6m large tube plate machining for oxidation reactor project

Following our previous 6.6m large tube plate machining project, we have successfully finished another larger machining task for a 8.6m tube plate recently. Now the final finish machining is done, and the plate is about to ship out. This tube plate is used in a oxidation reactor for a petrochemical enterprise.

Chemical reactor is the core equipment in chemical production process, and the machining quality of each unit impacts a lot whether the reactor equipment can meet the requirements in the actual production process.This project starts at aprial this year, and the main components are 7.3m tube plate and 8.6m tube plate.

This 8.6m large tube plate with main parameters as below:

Diameter: 8.6m

Plate Thickness: 120mm

Tube hole diameter: 32.3mm

Hole number: 37000+

Total Weight: 75t

Machining Equipment: Innse Berardi FAF 280

The project has a very high demand for the inspecition of deep hole machining, surface roughness and the subsequent performance of the tube plate from the original rough machining to the final chamfering process.During the machining process we have even checked these more than 37 thousand holes one by one to ensure the high precision demand on the tube plate.


Large Machining

Raw material arrived


Large Machining

Clamping


Large Machining

Machined by our Innse Berardi FAF280


  • Tel: +86 592 5580 601
  • Mob: +86 186 5928 0806
  • WhatsApp: +86 186 5928 0806
  • E-mail: bell@openex.com.cn
  • Add.: Unit 2205, No. 170 East Tapu Road, Siming District, Xiamen City, Fujian Province, China.
Aluminum Casting Aluminum castings--GIS Casing Aluminum castings inspection Aluminum Castings Cylinder Part Aluminum Casting projects ALuminum casting parts-power transition Aluminum castings --GIS casing Aluminum Casting Parts for power transition
Large Metal Fabrication Equipment, Heavy Machining Equipment
Sitemap

Copyright © Openex Mechanical Technology Ltd. All Rights Reserved

Technical Support: